Your second monitor is not detected? Follow this guide to solve it right now!

If your second monitor is not detected on Windows 10, even though you know the monitor itself works fine and the video output it’s connected to is fine, don’t give up hope. Usually it’s a driver problem, it should be very easy to fix. Read on to find out how…

5 Fixes for ‘second monitor not detected’:

If your video driver is out of date, incorrect or faulty, Windows 10 (and Windows 7) won’t be able to extend or mirror your desktop to your second display. Rolling back the driver to an older version may fix the problem.

  1. Roll back to a previously installed video driver
  2. Update your video driver
  3. Make sure your monitor refresh rates are set to same
  4. Change your project mode
  5. Repair corrupted system files

Fix 1: Roll back to a previously installed video driver

Sometimes the latest drivers don’t work properly on Windows 10. To check if this is what’s causing your problem, simply roll back to a previous version of your video driver (aka ‘display driver’).

1) On your keyboard, press the Windows logo key and R (at the same time) to invoke the Run box.

2) Type devmgmt.msc and press Enter.

3) In the Display adapters section, right-click on your display device software, and select Properties.

4) Select the Driver tab and click Roll Back Driver, then follow the on-screen instructions.

Note: If the Roll Back Driver option grayed out, you can download a previous video driver from the manufacturer’s website for your video card and install it on your Windows 10, or try the following Method 2.

5) When complete, restart your computer, and see if Windows can now detect your second monitor.

Fix 2: Update your video driver

If rolling back your video driver doesn’t enable Windows 10 to recognize your second monitor, it’s likely you’re using the wrong driver. There are two ways you can get the right driver for your video card: manually or automatically. 

Manual driver update – You can update your video driver manually by going to the manufacturer’s website for your video card, and searching for the most recent correct driver for it. Be sure to choose the only driver that is compatible with your variant of Windows 10. 

Automatic driver update – If you don’t have the time, patience or computer skills to update your video driver manually, you can, instead, do it automatically with Driver Easy. Driver Easy will automatically recognize your system and find the correct driver for your exact video card, and your variant of Windows 10, and it will download and install it correctly:

1) Download and install Driver Easy.

2) Run Driver Easy and click the Scan Now button. Driver Easy will then scan your computer and detect any problem drivers.

3) Click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system. (This requires the Pro version which comes with full support and a 30-day money back guarantee. You’ll be prompted to upgrade when you click Update All.) 

Note: You can do it for free if you like, but it’s partly manual.

4) Restart your computer and check to see if Windows 10 / Windows 7 can now detect your second monitor.

Fix 3: Make sure your monitor refresh rates are set to same

The monitor/screen refresh rate is the number of times in a second that your screen refresh the images on it. When two monitors are connected to Windows 10 together, the refresh rate plays a vital role. Some graphics card don’t support different refresh rate at the same time.

So if the screen fresh rate of your two monitors are different, your second monitor probably can’t be detected.

Follow to make sure your monitor refresh rates are set to same:

1) On your keyboard, hold down the Windows logo key, then press the I key.

2) Click System on the pop-up Settings window.

3) Click Advanced  display settings under the Display section.

4) Click Display adapter properties for Display 1, then clikc Display adapter properties for Display 2.

5) Check to see what the Screen refresh rates of both monitors under the Monitor sections.

5a) If the rates are different, then changed either one to set them to same. Then save your change by Apply OK and proceed to check to see if your second monitor is detected successfully.

5b) If the rates have been set to same already, then move on to next fix.

Fix 4: Change your project mode

Sometimes your second monitor can’t be detected might due to the wrong-set project mode. Quickly and easily change your project mode by these two steps:

1) On your keyboard, hold down the Windows logo key, then press the key.

2) Select Duplicate if you want to display the same screen on your two monitors. Select Extend if your want to earn more workplace.

Fix 5: Repair corrupted system files

Missing, corrupted, or damaged system files may be the culprit for this error. To eliminate this issue as a possible cause, you can try the 2 ways below to repair possible system file issues.

  1. Repair & replace corrupt system files with Fortect
  2. Run SFC scan

Repair & replace corrupted system files with Fortect

The issue could be caused by corrupt system files. Fortect is a tool that specializes in Windows repairing and fixing corrupt files automatically.

With Fortect, the preliminary will scan your computer’s operating system for viruses, malware, and missing, damaged, or corrupt files, then it removes all problematic files found and replaces them with new healthy files. It’s like a clean reinstall of your operating system, except that you won’t lose any user data, and all programs, and settings are exactly as they are before the repair.

Here’s how to use Fortect to repair system files on your PC:

1) Download and install Fortect.

2) Fire up Fortect and run a free scan.

3) Once finished, Fortect will generate a detailed report of your computer health, which includes all issues detected.

To fix all the issues automatically, click Start Repair (You’ll need to purchase the full version. It comes with a 60-day Money-Back Guarantee so you can refund anytime if Fortect doesn’t fix your problem).

If you run into any problems while using Fortect, or if it doesn’t work for you, don’t hesitate to contact Fortect support team.

5) Restart your computer for the changes to take effect.

6) Check your computer to see if the issue is fixed.

Run SFC scan

System File Checker (SFC) is a handy feature in Windows that helps scan your system files and repair missing or corrupted system files(including those related to BSOD). To run the SFC scan:

1) On your keyboard, press the Windows logo key and type cmd. Then right-click on Command Prompt and click Run as administrator.

2) Click Yes when prompted to confirm.

3) In the command prompt window, type sfc /scannow and press Enter.

It’ll take some time for the SFC to replace the corrupted system files with new ones if it detects any, so please be patient.

4) Restart your computer for the changes to take effect.

5) Check your computer to see if the problem has been fixed.

That’s all there is to it. Hopefully one of these methods resolves your problem, and you can now extend your desktop to your second monitor, or mirror/project your laptop onto your second monitor. 

If you have any questions, ideas or suggestions, please let me know in the comments. Thanks for reading!

291 people found this helpful

Available in other languages

Wird Ihr zweiter Bildschirm unter Windows 10 nicht erkannt? Keine Angst! Hier finden Sie 5 Methoden, um dieses Problem zu lösen. Schauen Sie es an!
Si vous avez correctement connecté votre deuxième moniteur, mais votre PC ne le détecte pas, vous pouvez voir cet article pour le résoudre.